QMobile Gabbar SC6531E Infinity CM2SCR Flash File Firmware With Boot Key

Read Out Details

Card found : 0000
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]

SPRD mode : SC6531 : REV : 0000 : NOR : [ 4MB ]

Operation : Identify [ v1.07 ]
BootMode : FLASH

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device …

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

IMEI[1]
IMEI[2]

Done!
Elapsed: 00:00:17

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device …

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_0184BD3B2733_NVM.nv

Executing FormatFFS …
Format FFS Done!

Done!
Elapsed: 00:00:27

Reconnect Power/Cable!

Operation : Read Flash [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device …

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Card found : 03AA550E , v0146
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]

SPRD mode : SC6531 : REV : 0000 : NOR : [ 4MB ]

Operation : Identify [ v1.07 ]
BootMode : FLASH

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device …

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

QMobile Gabbar SC6531E Infinity CM2SCR Flash File Firmware With Boot Key

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

IMEI[1]
IMEI[2]

Done!
Elapsed: 00:00:17

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device …

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_0184BD3B2733_NVM.nv

Executing FormatFFS …
Format FFS Done!

Done!
Elapsed: 00:00:27

Reconnect Power/Cable!

Operation : Read Flash [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device …

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read Flash [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device …

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Read Flash Ok, Size : 4.00 MiB

Saved to : C:\Users\malik haider\Desktop\SPRD_SPI_GIGADEVICE_GD25Q_4MiB.bin

Done!
Elapsed: 00:00:45

Reconnect Power/Cable!