QMobile K100 SPD6531 Flash File With Boot Key

Chinese Miracle II [SPD module] v 1.27

Set mode to : SPD6531

Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone…

Device boot not done
Check Drivers
Try again

Reconnect Power/Cable!

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone…

Phone found! [ 3 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending boot …
1Boot Sent , starting…
2Boot Ver : Spreadtrum Boot Block version 1.2
3Boot Ok
CPU ID : 6531 , FDLStat : 0100
1] Flash DIE : 00C8 0060 0016 0000
2] Flash VEN : GigaDevice , GD25LQ32
3] Flash CAP : 00400000

Elapsed: 00:00:18

Reconnect Power/Cable!

Boot Key

QMobile K100 SPD6531 Flash File With Boot Key

Its Home Button Press Home Button And Insert USB Cable And Last Insert Battery Mobile Boot Success

Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone…

Elapsed: 00:00:24

Reconnect Power/Cable!

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone…

QMobile K100 SPD6531 Flash File With Boot Key

Phone found! [ 3 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending boot …
1 First Boot Sent , starting…
2 Ver : Spreadtrum Boot Block version 1.2
3 Boot Ok
CPU ID : 6531 , FDLStat : 0100
1] Flash DIE : 00C8 0060 0016 0000
2] Flash VEN : GigaDevice , GD25LQ32
3] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Set FileInfo :
Model Vendor : K100
Model Name : Qmobile
ExtInfo Data : English,Urdu